Woodpeckers and INCRA sell what is essentially the same router lift: INCRA describes its QuickLift as a custom version of the Woodpeckers QuickLift. Both raise and lower the router with a spring-assisted wrench, fine-adjust with a crank at 1/32 inch per turn, and let you change bits from above the table. What differs is the ring system, the table fit and the router list.
This guide compares the two using each company’s own product pages, and shows the routers we have researched for each size. It reads from the same data as our compatibility finder, so the two always match.
Woodpeckers vs INCRA QuickLift at a glance
| Feature | Woodpeckers QuickLift | INCRA QuickLift |
|---|---|---|
| Plate | 9.25 x 11.75 inch aluminum plate (QuickLift), or a steel plate (QuickLift HDS) | 9-1/4 x 11-3/4 x 3/8 inch aluminum plate |
| Reducing rings | Twist-lock rings (molded on the aluminum plate, steel on the HDS) | MagnaLOCK magnetic steel rings; five included (3/8, 1, 1-5/8, 2-5/8 and 3-5/8 inch) |
| Motor sizes | 3.5-inch and 4.2-inch options | QuickLift 350 (3.5-inch), 420 (4.2-inch) and 414 (Milwaukee 5625 and 5626) |
| Table fit | Sold to fit Woodpeckers router tables | All INCRA router tables, and other tables that use the same plate size with a 0.750-inch corner radius. Kreg and JessEm tables need the INCRA CleanSweep Table Adapter |
Source: the Woodpeckers QuickLift page and owner manual, and the INCRA QuickLift page, checked 2 November 2026.
Woodpeckers QuickLift 3.5: compatible routers
6 researched router-lift relationships · 5 verified · 1 unverified
| Router | Status | What you need | Source |
|---|---|---|---|
| Bosch 1617EVS Router | ✓ Manufacturer Verified | Direct fit; Woodpeckers lists the Bosch 1617. The manual notes this short motor barrel is too short for above-the-table bit changes; offset wrenches and collet extenders can help. | Source: Manufacturer Product Page ↗ Checked: 2026-10-25 |
| Bosch 1618 Router | ✓ Manufacturer Verified | Direct fit; Woodpeckers lists the Bosch 1618. The manual notes this short motor barrel is too short for above-the-table bit changes; offset wrenches and collet extenders can help. | Source: Manufacturer Product Page ↗ Checked: 2026-10-25 |
| DeWalt DW618 Router | ✓ Manufacturer Verified | Direct fit; Woodpeckers lists the DeWalt 618. | Source: Manufacturer Product Page ↗ Checked: 2026-10-25 |
| Porter-Cable 690 Router | ✓ Manufacturer Verified | Direct fit; Woodpeckers lists the Porter-Cable 690. The manual notes this short motor barrel is too short for above-the-table bit changes; offset wrenches and collet extenders can help. | Source: Manufacturer Product Page ↗ Checked: 2026-10-25 |
| Porter-Cable 890 Router | ✓ Manufacturer Verified | Direct fit; Woodpeckers lists the Porter-Cable 890. | Source: Manufacturer Product Page ↗ Checked: 2026-10-25 |
| DeWalt DW616 Router | ? Unverified | — | Reviewed: Manufacturer Product Page ↗ Checked: 2026-10-25 |
Woodpeckers QuickLift 420: compatible routers
2 researched router-lift relationships · 2 verified
| Router | Status | What you need | Source |
|---|---|---|---|
| Porter-Cable 7518 Router | ✓ Manufacturer Verified | Direct fit; Woodpeckers lists the Porter-Cable 7518 for its 4.2-inch motor option. | Source: Manufacturer Product Page ↗ Checked: 2026-10-25 |
| Triton TFBR001 Router Motor | ✓ Manufacturer Verified | Compatible per Triton, which lists the Woodpecker QuickLift 420. | Source: Manufacturer Product Page ↗ Checked: 2026-11-05 |
INCRA QuickLift 350: compatible routers
7 researched router-lift relationships · 6 verified · 1 unverified
| Router | Status | What you need | Source |
|---|---|---|---|
| Bosch 1617EVS Router | ✓ Manufacturer Verified | Direct fit; INCRA lists the Bosch 1617EVS. Some 3.5-inch routers may need offset collet wrenches for above-table bit changes (INCRA note). | Source: Manufacturer Product Page ↗ Checked: 2026-11-02 |
| Bosch 1618 Router | ✓ Manufacturer Verified | Direct fit; INCRA lists the Bosch 1618. Some 3.5-inch routers may need offset collet wrenches for above-table bit changes (INCRA note). | Source: Manufacturer Product Page ↗ Checked: 2026-11-02 |
| DeWalt DW610 Router | ✓ Manufacturer Verified | Direct fit; INCRA lists the DeWalt DW610. Some 3.5-inch routers may need offset collet wrenches for above-table bit changes (INCRA note). | Source: Manufacturer Product Page ↗ Checked: 2026-11-02 |
| DeWalt DW618 Router | ✓ Manufacturer Verified | Direct fit; INCRA lists the DeWalt DW618. Some 3.5-inch routers may need offset collet wrenches for above-table bit changes (INCRA note). | Source: Manufacturer Product Page ↗ Checked: 2026-11-02 |
| Porter-Cable 690 Router | ✓ Manufacturer Verified | Direct fit; INCRA lists the Porter-Cable 690-699 series. Some 3.5-inch routers may need offset collet wrenches for above-table bit changes (INCRA note). | Source: Manufacturer Product Page ↗ Checked: 2026-11-02 |
| Porter-Cable 890 Router | ✓ Manufacturer Verified | Direct fit; INCRA lists the Porter-Cable 890-899 series. Some 3.5-inch routers may need offset collet wrenches for above-table bit changes (INCRA note). | Source: Manufacturer Product Page ↗ Checked: 2026-11-02 |
| DeWalt DW616 Router | ? Unverified | — | Reviewed: Manufacturer Product Page ↗ Checked: 2026-11-02 |
INCRA QuickLift 420: compatible routers
3 researched router-lift relationships · 3 verified
| Router | Status | What you need | Source |
|---|---|---|---|
| Porter-Cable 7518 Router | ✓ Manufacturer Verified | Direct fit; INCRA lists the Porter-Cable 7518 for the QuickLift 420 (4.200-inch motors). | Source: Manufacturer Product Page ↗ Checked: 2026-11-02 |
| Porter-Cable 7519 Router | ✓ Manufacturer Verified | Direct fit; INCRA lists the Porter-Cable 7519 for the QuickLift 420 (4.200-inch motors). | Source: Manufacturer Product Page ↗ Checked: 2026-11-02 |
| Triton TFBR001 Router Motor | ✓ Manufacturer Verified | Direct fit; INCRA lists the Triton motor TFBR001 for the QuickLift 420. | Source: Manufacturer Product Page ↗ Checked: 2026-11-05 |
INCRA QuickLift 414: compatible routers
1 researched router-lift relationship · 1 verified
| Router | Status | What you need | Source |
|---|---|---|---|
| Milwaukee 5625 Router | ✓ Manufacturer Verified | Direct fit; INCRA lists the Milwaukee 5625-20 (and 5626) for the QuickLift 414. | Source: Manufacturer Product Page ↗ Checked: 2026-11-02 |
Which one should you choose?
- Milwaukee 5625: in the sources we researched, only INCRA lists a QuickLift for this router (the 414). Woodpeckers’ QuickLift page lists 3.5-inch and 4.2-inch options only.
- Bosch 1618 and DeWalt DW610: INCRA names them for the 350. Woodpeckers names the Bosch 1618 but, for DeWalt, lists the 618 only.
- Your table: check the plate size first. Woodpeckers sells its lift to fit its own tables. INCRA lists the plate size and corner radius it fits, and says Kreg and JessEm tables need an adapter.
- Rings: INCRA uses magnetic rings that swap without tools. Woodpeckers uses twist-lock rings, with a steel plate version available.
- 3.5-inch routers: both companies say some may need offset collet wrenches for above-table bit changes. Woodpeckers’ manual names the Porter-Cable 690 and Bosch 1617/1618.
Frequently asked questions
Are the Woodpeckers and INCRA QuickLifts the same lift?
INCRA describes its QuickLift as a custom version of the Woodpeckers QuickLift. The mechanism and adjustment are described the same way. The plate, rings, table fit and model range differ, as shown above.
Does the INCRA QuickLift fit the Milwaukee 5625?
Yes. INCRA lists the Milwaukee 5625-20 and 5626 for the QuickLift 414.
Which routers are not listed?
The tables above show every router we have researched for these lifts. If your router is not listed, or is shown as unverified, we did not find it in the maker’s own documentation, which does not mean it is incompatible.
Check another router or lift combination:
Check the Compatibility Finder →How we check
Every result links to its source and shows the date we checked it. Read how we verify compatibility for our status labels.
