Milwaukee 5615, 5616 and 5619 Router Lift Compatibility Guide

The Milwaukee 5615, 5616 and 5619 are listed together by router-lift makers, because they share the same motor size. Which lift fits, and which model of that lift you need, depends on the lift.

This guide summarizes the manufacturer-supported router lift options currently researched by Wood Tool Guide for these three routers. It reads from the same data as our compatibility finder, so the two always match.

Milwaukee 5615, 5616 and 5619 Router Lift Compatibility at a Glance

Which lift model do you need?

The JessEm Rout-R-Lift II is sold in different models for different routers. For the Milwaukee 5615, 5616 and 5619, JessEm lists model 02313. Ordering a different model number is the most common way to end up with a lift that does not fit.

The Kreg PRS5000 uses clamp blocks, and Kreg lists these Milwaukee routers with a 3.32-inch motor and hole pattern 4.

This is not the Milwaukee 5625

The Milwaukee 5625 is a different router and has its own results. See the Milwaukee 5625 router lift compatibility guide instead.

Before you buy a lift for these Milwaukee routers

• Check the model number on your router (5615, 5616 or 5619) before you order.
• For the JessEm Rout-R-Lift II, order model 02313.
• Follow the linked source for each lift. Manufacturers change their lists over time.

Frequently asked questions

Which JessEm Rout-R-Lift II fits the Milwaukee 5619?

JessEm lists model 02313 for the Milwaukee 5615, 5616 and 5619.

How do I set the Kreg PRS5000 for these Milwaukee routers?

Set the PRS5000 clamp blocks to hole pattern 4, per the Kreg manual.

What if a lift is not listed?

The cards above show every lift we have researched. If a lift you are considering is not listed, we have not yet verified it, which does not mean it is incompatible.

How we check

Every result links to its source and shows the date we checked it. Read how we verify compatibility for our status labels.