Woodpeckers QuickLift Compatible Routers: Complete Compatibility Guide

The Woodpeckers QuickLift is a router lift for router tables that raises the collet above the table for bit changes. It comes in two motor sizes: a 3.5-inch option and a 4.2-inch option. Which one you need depends on your router, and a few routers have a limitation you should know about before buying.

This guide summarizes the manufacturer-supported routers currently researched by Wood Tool Guide for the Woodpeckers QuickLift. It reads from the same data as our compatibility finder, so the two always match.

Woodpeckers QuickLift 3.5: compatible routers

6 researched router-lift relationships · 5 verified · 1 unverified

RouterStatusWhat you needSource
Bosch 1617EVS Router✓ Manufacturer VerifiedDirect fit; Woodpeckers lists the Bosch 1617. The manual notes this short motor barrel is too short for above-the-table bit changes; offset wrenches and collet extenders can help.Source: Manufacturer Product Page ↗
Checked: 2026-10-25
Bosch 1618 Router✓ Manufacturer VerifiedDirect fit; Woodpeckers lists the Bosch 1618. The manual notes this short motor barrel is too short for above-the-table bit changes; offset wrenches and collet extenders can help.Source: Manufacturer Product Page ↗
Checked: 2026-10-25
DeWalt DW618 Router✓ Manufacturer VerifiedDirect fit; Woodpeckers lists the DeWalt 618.Source: Manufacturer Product Page ↗
Checked: 2026-10-25
Porter-Cable 690 Router✓ Manufacturer VerifiedDirect fit; Woodpeckers lists the Porter-Cable 690. The manual notes this short motor barrel is too short for above-the-table bit changes; offset wrenches and collet extenders can help.Source: Manufacturer Product Page ↗
Checked: 2026-10-25
Porter-Cable 890 Router✓ Manufacturer VerifiedDirect fit; Woodpeckers lists the Porter-Cable 890.Source: Manufacturer Product Page ↗
Checked: 2026-10-25
DeWalt DW616 Router? Unverified—Reviewed: Manufacturer Product Page ↗
Checked: 2026-10-25

Woodpeckers QuickLift 420: compatible routers

2 researched router-lift relationships · 2 verified

RouterStatusWhat you needSource
Porter-Cable 7518 Router✓ Manufacturer VerifiedDirect fit; Woodpeckers lists the Porter-Cable 7518 for its 4.2-inch motor option.Source: Manufacturer Product Page ↗
Checked: 2026-10-25
Triton TFBR001 Router Motor✓ Manufacturer VerifiedCompatible per Triton, which lists the Woodpecker QuickLift 420.Source: Manufacturer Product Page ↗
Checked: 2026-11-05

QuickLift or QuickLift HDS?

Woodpeckers sells the same lift with an aluminum plate (QuickLift) or a ground steel plate (QuickLift HDS). Other than the plate and twist-lock-ring material, Woodpeckers says the two are identical, so the routers listed above apply to both. The steel plate works with magnetic featherboards.

Check before you buy

  • Choose the motor option that matches your router: 3.5-inch for routers such as the Bosch 1617 and DeWalt 618, and 4.2-inch for the Porter-Cable 7518.
  • Short-barrel motors, such as the Porter-Cable 690 and Bosch 1617, mount in the lift, but Woodpeckers’ manual says they are too short for above-the-table bit changes. Offset wrenches and collet extenders can help.
  • Check the plate size against your table opening. Woodpeckers lists the plate at 9.25 by 11.75 inches and sells the lift for its own router tables, so confirm that your table can take it.
  • Follow the linked source for each router. Manufacturers change their lists over time.

Frequently asked questions

Does the Woodpeckers QuickLift fit the Bosch 1617?

Yes. Woodpeckers lists the Bosch 1617 for the 3.5-inch motor option. The manual notes that its short motor barrel is too short for above-the-table bit changes.

Which QuickLift fits the Porter-Cable 7518?

The 4.2-inch motor option. Woodpeckers lists the Porter-Cable 7518 for it.

What about routers that are not listed?

The tables above show every router we have researched for this lift. If your router is not listed, or is shown as unverified, we did not find enough evidence in Woodpeckers’ own documentation, which does not mean it is incompatible. For example, Woodpeckers lists the DeWalt 618 for the 3.5-inch option but not the DW616.

You can also check the live database in the Router Lift Compatibility Finder.

How we check

Every result links to its source and shows the date we checked it. Read how we verify compatibility for our status labels.