Milwaukee 5625 Router Lift Compatibility Guide

The Milwaukee 5625-20 is a large 3-1/2 max HP fixed-base production router. If you are choosing a router lift for it, the important point is that not every lift that accepts a “large router motor” should automatically be treated as compatible. WoodToolGuide only marks a fit as verified when the manufacturer documentation supports the exact model or an exact documented configuration.

Quick answer: Among the lift relationships currently researched by WoodToolGuide, the JessEm Mast-R-Lift II is manufacturer verified for the Milwaukee 5625. The Kreg PRS5000, JessEm Rout-R-Lift 3.5XT, and JessEm Rout-R-Lift II are kept ? Unverified because the reviewed manufacturer documentation does not explicitly list the Milwaukee 5625.

Milwaukee 5625 Router Lift Compatibility Summary

You can also check the live database in the Router Lift Compatibility Finder.

Why the Milwaukee 5625 needs careful checking

Milwaukee describes the 5625-20 as a 15-amp, variable-speed production router designed for both free-hand and router-table work. It includes above-the-table height adjustment in its original fixed base. That is useful, but it does not mean the motor will clamp correctly in every third-party lift.

JessEm publishes the Milwaukee 5625 as a compatible motor for the Mast-R-Lift II and identifies its motor diameter as about 4.143 inches. That figure is close to the common 4.2-inch class, but “close” is not sufficient evidence for another lift. Clamp geometry, housing shape, and the manufacturer’s approved range can matter as much as nominal diameter.

JessEm Mast-R-Lift II: verified fit

This is the clearest option in the current WoodToolGuide dataset. JessEm’s official Mast-R-Lift II compatibility list explicitly names Milwaukee 5625. No model-number inference is required.

For a buyer who wants the strongest documentation trail among the lifts currently researched here, the Mast-R-Lift II is therefore the most straightforward Milwaukee 5625 match. Always confirm the current manufacturer page before purchase because product revisions can occur.

Kreg PRS5000: why we do not call it compatible

The Kreg PRS5000 manual includes a clamp-block compatibility table. In that table, Kreg lists Milwaukee 5626 at a 4.143-inch motor diameter and assigns it clamp-block hole pattern 2. It does not name the Milwaukee 5625.

It would be tempting to assume that a similar model designation or motor diameter makes the 5625 equivalent. WoodToolGuide deliberately avoids that jump. Until Kreg documentation explicitly supports the 5625, or another authoritative Kreg source establishes equivalence, the relationship remains ? Unverified.

JessEm Rout-R-Lift 3.5XT: not listed

JessEm’s Rout-R-Lift 3.5XT is built around direct-fit 3.5-inch motors and selected smaller motors that can use an optional collar. The reviewed compatibility page does not list the Milwaukee 5625. Because the 5625 is a larger production-router motor, WoodToolGuide does not infer a fit from the lift’s general clamping concept.

JessEm Rout-R-Lift II: model-specific versions matter

The Rout-R-Lift II is sold in several versions matched to particular router families. JessEm lists version 02313 for Milwaukee 5615, 5616 and 5619. The 5625 is not included in that published list. This is a good example of why the word “Milwaukee” alone is not enough when checking router-lift fitment.

Does the Milwaukee 5625 even need a lift?

Milwaukee built above-the-table height adjustment into the 5625 fixed-base system. For some router-table setups that may reduce the need for a separate lift. A dedicated lift can still offer advantages such as a purpose-built plate, fine height control, insert-ring system and easier motor removal, but it should be chosen for workflow rather than assumed to be mandatory.

Buying checklist for a Milwaukee 5625 lift

• Verify the exact router model: Milwaukee 5625-20, not a similarly numbered motor.
• Prefer an explicit manufacturer compatibility listing over diameter-only assumptions.
• Check the lift plate dimensions against your router table opening.
• Confirm access to the router switch and speed control after the motor is clamped.
• Review current manufacturer instructions before installation and bit changes.

Bottom line

For the Milwaukee 5625, the strongest documented choice in WoodToolGuide’s current lift set is the JessEm Mast-R-Lift II. The other researched lifts remain Unverified because their manufacturer documentation does not explicitly name the 5625. Unverified does not mean incompatible; it means there is not enough authoritative evidence for WoodToolGuide to claim a fit.

For the broader decision process, see our Router Lift Compatibility Guide and our compatibility verification method.

Sources checked

• Milwaukee 5625-20 official product page
• JessEm Mast-R-Lift II compatibility page
• Kreg PRS5000 manual
• JessEm Rout-R-Lift 3.5XT page
• JessEm Rout-R-Lift II page

Sources reviewed September 13, 2026. Manufacturer documentation can change; verify the linked source before purchase or installation.